Gaadhiga Infrared
Sharaxaad Gaaban:
Shaqada kululaynta caqliga.
Shaqada is-ogaanshaha.
Soo saarista ogaanshaha shaqada soo saarista alaarmiga.
RS 485 isgaarsiin taxane ah.
99.9% saxda ah ee kala soocida Baabuurka.
Qiimaynta Ilaalinta: IP67.
Faahfaahinta Alaabta
Tags Product
Tilmaamaha alaabta
| Astaamaha | Dqorista |
| Rqaadashada dhogortaxoogogaanshaha | Heerarka 4 ee xoogga laydhka ayaa la dejiyaa, waxay ku habboon tahay rakibidda beerta iyo dayactirka. |
| Dshaqada ogaanshaha | Ilaysyada ogaanshaha waxay bixiyaan hab fudud oo lagula soconayo waxqabadka dareemayaasha. |
| Wax soo saarka | Laba wax soo saar oo gaar ah(DSoo saarista qaylo-dhaanta iyo soo-saarka alaarmiga, NPN/PNP waa ikhtiyaari),lagu darayEIA-485 isgaarsiin taxane ah. |
| Shaqada gaashaanka | Csi toos ah u ogaanaya guuldarrooyinka emitter-ka ama soo-dhoweynta iyo wasakhowga muraayadda, waxay weli ku shaqeyn kartaa xaaladda guul-darrooyinka, waqtigaas oo dhan waxay soo diraan tilmaamo digniin ah iyo wax-soo-saarka alaarmiga. |
1.1 Qaybaha alaabta
Alaabooyinka waxaa ka mid ah qaybaha soo socda:
● Emitter iyo qaataha;
● Hal 5-core (emitter) iyo hal 7-core (qaate) fiilooyinka degdega ah;
● Daboolka la ilaaliyo;
1.3 Mabda'a shaqada alaabta
Alaabtu waxay inta badan ka kooban tahay aqbale iyo emitter, iyadoo la adeegsanayo mabda'a ah toogashada.
Aqbalaha iyo emitter-ku waxay leeyihiin tiro isku mid ah oo LED ah iyo unug sawir-qaade ah, LED-ka ku jira emitter-ka iyo unugga sawir-qaade ee ku jira aqbalaha ayaa isku mid ah oo la taabtay, marka nalka la xiro, nidaamku wuxuu sameeyaa wax soo saarka.
Tilmaamaha alaabta
| Cmaadooyinka | Tilmaamaha |
| Onambarka dhidibka ptical (beam);fogaanta dhidibka indhaha;dhererka iskaanka | 52;24mm;1248mm |
| Edhererka ogaanshaha waxtarka leh | 4 ~ 18m |
| Dareenka shayga ugu yar | 40mm(sawir toos ah) |
| Supply voltag | 24v DC±20%; |
| Sahaydahadda | ≤200mA; |
| Dwax soo saarka iscrete | Transistor PNP/NPN waa la heli karaa,soo-saarka ogaanshaha iyo soo-saarka alaarmiga,150mA ugu badnaan(30v DC) |
| EIA-485 wax soo saarka | EIA-485 isgaarsiin taxane ah waxay awood u siinaysaa kombuyuutar inuu farsameeyo xogta iskaanka iyo heerka nidaamka. |
| Isoo saarida iftiinka ndicator | WIftiinka heerka orking (cas), iftiin koronto (casaan), helaya iftiinka xoogga iftiinka (cas iyo jaalle midkiiba) |
| Rwaqtiga issponse | ≤10ms(toosaniskaan) |
| Cabirka(dhererka * ballac * dhererka) | 1361mm× 48mm× 46mm |
| Hawlgalkaxaalad | Heerkulka：-45℃~ 80℃qoyaan qaraabo ah ugu badnaan：95% |
| Chabayn | aaluminiumguri leh dhamaystir anodized madow;daaqadaha muraayadaha adag |
| Qiimaynta deegaanka | IEC IP67 |
Tilmaamaha iftiinka tilmaamaha
Nalalka LED-ka waxaa loo isticmaalaa in lagu muujiyo heerka shaqada iyo heerka guul dareysiga badeecadaha, soo-saarka iyo soo-qaaduhu waxay leeyihiin tiro isku mid ah oo iftiinka tilmaamaya.Nalalka LED-ku waxay ku yaalliin xagga sare ee emitter-ka iyo qaataha, kaas oo ka muuqda jaantuska 3.1
Djaantuska 3.1tilmaame iftiin tilmaame (xaalad shaqo;awoodiftiin)
| Iftiinka tilmaame | soosaarid | qaataha |
| Shaqada(casaan): iftiinka heerka shaqada | on：iftiinshaashadsi aan caadi ahayn u shaqeeya*off：iftiinqaylon si caadi ah ayuu u shaqeeyaa | on：iftiinshaashadwaa la xannibay**off：iftiinshaashadlama xannibo |
| Kulayl (cas)：Pnalka ower | on：helida beam waaxoog leh (faa'iidada xad-dhaafka ah ayaa ka badan8)biligleynaya：helida beam waa miyir beelid(faa'iidada xad dhaafka ah waaka yarin ka badan 8) | |
Ogow: * Marka muraayadda iftiinka u shaqeyso si aan caadi ahayn, wax-soo-saarka alaarmiga ayaa soo dira;** marka tirada dhidibka indhaha in ay yihiinxannibayway ka weyn tahaytirada beam dhigay, wax soo saarka ogaanshaha soo diri.
Jaantuska3.2 tilmaame iftiinka(helida xoogga beam/iftiin)
| Iftiinka tilmaame | Emitter iyo qaataha | isagoo xusaya |
| (① Cas, ② jaale) | ① Off, ② off：faa'iido xad dhaaf ah:16 | 1 dhererka 5m, faa'iidada xad-dhaafka ah ayaa ka badan 16;dhererka ogaanshaha ugu badan, faa'iidada xad-dhaafka ah waa 3.2 marka faa'iidada xad-dhaafka ah ay ka yar tahay8, ahpnalka ower waa biligleynaya. |
| ①on, ② off：faa'iido xad dhaaf ah: 12 | ||
| ① off, ②on：faa'iido xad dhaaf ah:8 | ||
| ①on, ②on：faa'iido xad dhaaf ah:4 |
Cabbirrada alaabta iyo xidhitaanka
4.1 cabbirka badeecada ayaa lagu muujiyay sawirka 4.1;
4.2 isku xidhka alaabta ayaa lagu muujiyay sawirka 4.2
Tilmaamaha ogaanshaha
5.1 Isku xirka
Marka hore, deji soo-dhoweynta iyo soo-saarka shaashadda iftiinka si waafaqsan jaantuska 4.2, oo hubi in xiriirku uu sax yahay (korontada marka la isku xirayo), ka dibna, u dhig etter-ka iyo aqbalaha wejiga fogaanta waxtarka leh.
5.2 Isku toosin
Daar korontada (24v DC), ka dib laba biligleynaya iftiinka tusaha shaashadda, haddii iftiinka korantada (casaanka) ee emitter-ka iyo qaataha uu shido, halka iftiinka heerka shaqada (casaanka) uu dansan yahay, shaashadda iftiinka ayaa ah. toosan.
Haddii nalka heerka shaqada (casaan) ee soo-saaruhu uu shido, soo-saaruhu iyo (ama) qaataha waxa laga yaabaa inay cilad qabaan, oo ay u baahdaan in dib loogu hagaajiyo warshadda.
Haddii nalka heerka shaqada (casaan) ee qaataha uu shidan yahay, waxaa laga yaabaa in shaashadda iftiinku aanay toosnayn, dhaqaaqin ama u rogrogmi-qaadiyaha ama soo-saaruhu si tartiib ah oo u fiirso, ilaa nalka heerka shaqada ee soo-heluhu uu dansan yahay (haddii aan la toosin karin ka dib). muddo dheer, waxay la macno tahay in dib loo dayactiro warshadda).
Digniin: ma jiraan shay la oggol yahay inta lagu jiro habka toosinta.
Helitaanka iftiinka xoogga iftiinka (casaan iyo jaalle kasta) ee emitter iyo aqbaluhu waxay la xiriiraan masaafada shaqada ee dhabta ah, macaamiishu waxay u baahan yihiin inay nidaamiyaan iyadoo lagu saleynayo isticmaalka dhabta ah.Faahfaahin dheeraad ah oo ku jirta jaantuska 3.2.
5.3 Ogaanshaha shaashadda iftiinka
Ogaanshaha waa in lagu shaqeeyo fogaan wax ku ool ah iyo joogga ogaanshaha shaashadda iftiinka.
Isticmaalka walxaha cabbirkoodu yahay 200 * 40mm si loo ogaado muraayadda iftiinka, ogaanshaha waxaa lagu shaqeyn karaa meel kasta oo u dhaxaysa emitter-ka iyo qaataha, caadi ahaan dhammaadka aqbalaha, taas oo sahlan in la eego.
Inta lagu jiro ogaanshaha, ku ogow saddex jeer xawaare joogto ah (>2cm/s) oo ku saabsan shayga.(dhinaca dheer wuxuu ku siman yahay laydhka, xarun toosan, kor-hoos ama hoos-sare)
Inta lagu jiro habka, iftiinka heerka shaqada (casaan) ee qaataha waa inuu ahaadaa waqti kasta, bayaanka u dhigma wax soo saarka ogaanshaha waa inuusan isbeddelin.
Shaashadda iftiinka ayaa si caadi ah u shaqeysa marka ay buuxineyso shuruudaha kore.
toosinta
Haddii shaashadda iftiinka aysan ku jirin xaaladda ugu fiican ee shaqada (eeg sawirka 6.1 iyo djaantuska6.1), waa in la hagaajiyaa.See sawirka 6.2.
1,Twuxuu jiho toosan: hagaajin ilaalintadaboolid: 4 lowska dabacsanof go'anpla wareegaydaboolka daboolka, wareegga gacanta ee daboolka la ilaaliyo;
Hagaajiiftiinshaashadda: ka fur furaha hagaajinta heerka midig, oo adkee bidixdaheerkahabaynmentdhinaca saacada u wareeg si aad u hagaajisidiftiinshaashad.Taas beddelkeeda, hagaajin la beddeli karoiftiinshaashad.PFiiro gaar ah si loo hagaajiyo qadarka bidix, maroodiga midig;
2,Twuxuu jihada toosan: 4 lowska dabacsanof daboolka daboolan ee go'an, 4 dabool toosan oo toosan si loo hagaajiyo rakibaadda chassis-ka;
3,To u fiirso tusaha gobolka, si aad u hubisoiftiinShaashadda sida ugu fiican ee shaqada, adkee chassis hagaajinta nuts iyo dhammaan boolal dabacsan.
Dhismaha warshadda
Halbeegyada soo socda ayaa lagu beddeli karaa iyada oo loo marayo EIA485 interface serial, set warshadda waa:
1 Marka wax soo saarka uu kiciyo, dabool joogto ah lambarka dhidibka indhaha N1=5;
2 Marka dhidibka indhaha ee N1-1 ee joogtada ah (ugu yaraan 3) la xiro, waqtiga digniinta cilladda: T = 6 (60s)
3 Nooca wax soo saarka: NPN caadi ahaan wuu furan yahay;
4 Nooca soosaarka alaarmiga: NPN caadi ahaan wuu furan yahay;
5 Habka sawirida: sawir toos ah;
Interface isgaarsiin taxane ah
8.1 Interface isgaarsiin taxane ah
● EIA485 interface xiriir ah, isgaarsiin aan kala go 'lahayn oo nus-duplex ah;
Heerka Baud: 19200;
● Qaabka jilaha: 1 start bit, 8 data bits, 1 stop bit, no pararity, dir oo hel xogta bilowga hoose
8.2 U dir oo hel qaabka xogta
Qaabka xogta: dhammaan xogtu waa qaab hexadecimal, xog kasta oo la diro iyo kuwa la helayo waxaa ka mid ah: 2 qiimaha byte-ka amar, 0~bytes badan oo xog ah, 1 code byte;
● 4 diritaanka iyo qaadashada amarrada guud ahaan, sida ku cad jaantuska 8.1
Jaantuska 8.1
Dalbo qiimaha
(hexadecimal) qeexida qaabka xogta
heli (hexadecimal) dir (hexadecimal)*
0x35.
0x55, 0x5A macluumaadka gobolka shaashadda iftiinka gudbiya 0x55,0x5A,CC 0x55,0x5A,N,N1,T,B,CC
0x65.
0x95.
N1 Marka uu kiciyo wax soo saarka, lambarka si joogto ah u ilaaliya iftiinka, 0 < N1 <10 iyo N1 < N；
Waqtiga N1-1 iftiinka joogtada ah ee iftiinka ah ee la ilaalinayo (10*T ilbiriqsi) , soo saarida alaarmiga marka wakhtigu dhaafo, 0<T <= 20；
Wax-soo-saarka B (bit 0, qaataha)Scan nooca calaamad (bit 3), 0 iskaanka toosan, 1 iskutallaab.0x30 ~ 0x3F.
N Tirada guud ee laydhka;
n Tirada qaybaha loo baahan yahay si loo gudbiyo macluumaadka laydhka (8 beams ayaa ka kooban hal qayb), 0 <n </ 8, marka N/8 uu haysto hadhaa, ku dar hal qayb;
D1,…
CC 1 Byte code code, kaas oo ah wadarta dhammaan tiradii ka hor (hexadecimal) oo meesha ka saarta 8 sare
8.3 Tilmaamaha dirida iyo helitaanka xogta
1 Habaynta bilawga ah ee shaashadda iftiinka waa habka helista isgaadhsiinta, loo diyaariyey helitaanka xogta.Mar kasta oo la helo hal xog, sida ku cad amarka helitaanka xogta, deji nuxurka xogta oo deji habka isgaadhsiinta si loo diro, xog la sii wado.Ka dib marka xogta la diro, deji habka isgaadhsiinta taxanaha ah si aad mar labaad u hesho.
2 Kaliya marka la helo xogta saxda ah, habka dirida xogta ayaa bilaabmaya.Xogta khaldan ee la helay waxaa ka mid ah: kood sax ah, qiyam khaldan (ma aha mid ka mid ah 0x35, 0x3A / 0x55, 0x5A / 0x65, 0x6A / 0x95,0x9A)
3 Goobaha bilowga ah ee nidaamka macmiilka waxa looga baahan yahay inay noqdaan hab dirida isgaadhsiinta xidhiidhsan, mar kasta ka dib marka xogta la diro, deji habka isgaadhsiinta taxanaha ah si aad isla markiiba u hesho, isu diyaariso helitaanka xogta ay soo dirtay shaashadda iftiinka.
4 Marka muraayada iftiinku hesho xogta uu soo diray nidaamka macmiilaha, dir xogta ka dib wareeggan iskaanka.Sidaa darteed, nidaamka macmiilka, ka dib marka la diro xogta mar kasta, sida caadiga ah, waa in ay tixgeliyaan 20 ~ 30ms sugaya helitaanka xogta.
5 Waayo, amarka shaashadda gobolka xogta dhigay (0x35, 0x3A), sababtoo ah baahida loo qabo in la qoro EEPROM ah, waxaa jiri doona waqti dheeraad ah in loo isticmaalo diraya xogta in la isticmaalo.Amarkan, kula tali macmiilka inuu tixgeliyo ilaa 1s sugaya helitaanka xogta.
6 Xaaladda caadiga ah, nidaamka macaamiisha ayaa isticmaali doona amarka gudbinta macluumaadka iftiinka shaashadda (0x65, 0x6A / 0x95, 0x9A) si joogta ah, laakiin shaashadda iftiinka iftiinka xogta gobolka (0x35, 0x3A) iyo amarka gudbinta (0x55, 0x5A kaliya ayaa la isticmaalaa) loo baahan yahay.Sidaa darteed, haddii aysan lagama maarmaan ahayn, aad ugu talinaynaa in aan la isticmaalin nidaamka macaamiisha (gaar ahaan shaashadda iftiinka amarka dejinta xogta gobolka).
7 Sida qaabka EIA485 interface serial is asynchronous nus-duplex ah, mabda'a shaqada ee diritaanka joogtada ah (0x65, 0x6A) iyo diritaanka joogtada ah (0x95, 0x9A) waa erayada soo socda:
● Diritaan ku meel gaadh ah: Inta lagu jiro bilawga, deji interface interface si aad u hesho, marka amarka nidaamka macaamiisha la helo, dhig interface interface si aad u gudbiso.Kadibna u dir xogta ku saleysan amarka la helay, ka dib markaad dirto xogta, interface serial ayaa dib loo dejin doonaa si loo helo.
Diritaanka joogtada ah: marka qiimaha amarka la helay uu yahay 0x95, 0x9A, billow diritaanka joogtada ah ee iftiinka iftiinka macluumaadka.
● Marka la eego xaaladda dirida joogtada ah, haddii mid ka mid ah dhidibka indhaha ee shaashadda iftiinka uu maqan yahay, soo dir xogta taxanaha ah iyada oo la raacayo xaaladda in goobaabin kasta oo sawirku uu dhammaaday iyada oo interface taxane ah la heli karo, dhanka kale, interface interface ayaa doona. loo dejiyo in la gudbiyo.
● Marka la eego xaaladda dirista joogtada ah, haddii aysan jirin dhidibka indhaha ee shaashadda iftiinka ah oo aan la hayn oo is-dhexgalka taxanaha la heli karo (ka dib gudbinta xogtan), interface serial ayaa loo dejin doonaa inuu helo, isagoo sugaya helitaanka xogta.
Digniin: Marka la eego xaaladda dirista joogtada ah, nidaamka macaamiisha had iyo jeer waa dhinaca helitaanka xogta, marka gudbinta loo baahan yahay, waxay ku sii socon kartaa oo kaliya xaaladaha in shaashadda iftiinka aan la hayn oo waa in lagu dhammeeyaa 20 ~ 30ms ka dib xogta waa la helaa, haddii kale, waxay keeni kartaa dhibaatooyin isgaarsiineed oo aan la saadaalin karin, waxayna keeni kartaa dhaawac soo gaara interface-ka, marka ay ka sii daran tahay.
Tilmaamaha Shaashadda Iftiinka iyo sida loola xidhiidho PC
9.1 Dulmar
Shaashadda Iftiinka waxa loo istcmaalay in lagu xidho xidhiidhka ka dhexeeya shaashada iftiinka taxanaha LHAC iyo PC, dadku waxa ay dejin karaan oo ay ku ogaan karaan heerka shaqada ee shaashadda iftiinka iyada oo loo marayo Shaashadda Iftiinka.
9.2 Rakibaadda
1 Shuruudaha rakibidda
● Windows 2000 ama XP habka ku shaqaynta ee Shiinaha ama Ingiriisiga;
● Hayso RS232 xiriiriye taxane ah (9-pin)
2 Tallaabooyinka rakibidda
● Fur galka: Software-ka isgaadhsiinta PC;
● Guji faylka rakibaadda, rakib Screen-Screen;
● Haddii ay hore u leedahay Shaashadda Iftiinka, rakibi waxay fulinaysaa hawlaha tirtirka marka hore, ka dibna dib u rakib software-ka
● Inta lagu jiro rakibidda, waxaad u baahan tahay inaad marka hore sheegtid hagaha rakibidda, ka dibna dhagsii Next si aad u rakibto
9.3 Tilmaamaha hawlgalka
1 Guji "bilow", hel "barnaamijka(P)\Light-Screen\Light-Screen", samee Shaashadda Iftiinka si ay u shaqeyso;
2 Ka dib markii la shaqeeyo Light-Screen, marka hore waxay soo baxaan interface ka shaxanka 9.1, interface bidix;guji interface-ka ama sug 10 ilbiriqsi, sawirka midig ee sawirka 9.1 ayaa soo muuqda.
3 ku saxiix magaca isticmaalaha: abc, furayaasha sirta ah: 1, dabadeed dhagsii "confirm", geli interface-ka shaqada ee Shaashada Iftiinka, sida ku cad sawirka 9.2 iyo shaxanka 9.3.
Jaantus 9.2 Bandhig shaqo oo dhijitaal ah
Jaantuska 9.3 Shaashadda sawir-gacmeedka interface interface
4 Interface-ka shaqada ee soo bandhigida waxaa loo isticmaalaa in lagu muujiyo macluumaadka shaqada iyo xogta heerka shaashadda, faahfaahin dheeraad ah erayada soo socda:
● Xaaladda shaqada: sanduuqa gobolka ee hadda jira wuxuu muujinayaa in isgaarsiintu caadi tahay iyo in kale, dhagsii badhanka is-hubinta, sii wad imtixaan taxane ah;
● Akhriska shaashadda khafiifka ah: dhagsii badhanka akhriska gacanta, hal mar akhri xogta heerka shaashadda;
● Goobaha gudbinta beam: Qaybaha gudbinta beam waxay dejiyaan lambarka qaybta gudbinta, marka badhanka laydhka la akhriyo, si joogto ah u soo dir macluumaadka iftiinka;
● Macluumaadka heerka shaashadda iftiinka: muuji tirada guud ee muraayadda iftiinka, tirada iftiinka joogtada ah ee xannibay, wakhtiga digniinta xannibaadda, (waqtiga qaylo-dhaanta cilladda oo ka yar N1-1 beam joogto ah oo xanniban), calamadaha sida ogaanshaha wax soo saarka, wax soo saarka xoogga alwaax (aan la isticmaalin), soo-saarka alaarmiga cilladda si joogto ah u fur/ xir calaamada iyo nooca iskaanka (iskaanka toosan/iska gudubka), iwm
Muujinta dhijitaalka ah (Jaantuska 9.2): Iftiinka tilmaamaya (ku habbee qaybta, dhidibka indhaha ee hoose waa kan ugu horreeya) wuxuu muujinayaa bayaan kasta oo beam ah, iftiinka marka la xannibo, iftiinka marka aan la xannibin.
● Sawirka sawirka (Jaantuska 9.3): muuji qaabka walxaha dhex mara shaashadda iftiinka muddo wakhti ah.
● Console bandhig sawireed: dooro midabka garaafyada (doorashada hore - midabka asalka ee garaafyada (doorashada asalka-), ballaca wakhtiga daaqada bandhiga (waqtiga x axis-X), iwm. bandhig (badhanka ayaa shiran, bilow xog ururin iyo bandhig.
5 Marka aad dooranayso goobaha halbeegyada/menuunibeeka cabbirka nidaamka, soo bandhig interface-ka dejinta cabbirka (Jaantuska 9.4), si loo dejiyo cabbirrada shaqada ee shaashadda iftiinka, tafaasiil dheeraad ah ayaa ku jira erayada soo socda:
● Qiyaasaha muraayadda iftiinka: deji tirada laydhka ee si joogto ah u maqan, xannibo wakhtiga digniinta, qaabka wax-soo-saarka calaamad kasta, iwm. Waxaa ka mid ah: calaamadaha sida ogaanshaha soo-saarka wax-soo-saarka tamarta beam (aan la isticmaalin), soo-saarka alaarmiga cilladku waa joogto. xiran marka la doorto (ku hay √ gudaha sanduuqa), nooca sawirku waa iskaanka marka la doorto.
● Xuduudaha shaashadda iftiinka ayaa soo bandhigay: muuji calaamadaha shaashadda iftiinka, sida tirada guud ee laydhka, tirada laydhka ee si joogto ah u xanniban, wakhtiga digniinta xannibaadda, soo-saarka ogaanshaha, soo-saarka xoogga alwaax (aan la isticmaalin), digniinta cilladaha si joogto ah calaamad furan/xirmo iyo nooca iskaanka (iska gudubka/skaanka toosan), iwm.
● Ka dib markii la rakibo xuduudaha shaashadda, dhagsii badhanka xaqiiji, muuji sanduuqa dib udajinta shaashadda, dhagsii badhanka xaqiijinta sanduuqa, si aad u dejiso xuduudaha daaha iftiinka, dhagsii badhanka tirtirka, haddii aadan rabin inaad dejiso xuduudaha.
● Guji badhanka baabi'inta ee interface-ka habaynta cabbirka si aad uga baxdo interface-kan.
Xiriirka ka dhexeeya shaashadda iftiinka iyo PC
10.1 Xiriirka ka dhexeeya shaashadda iftiinka iyo PC
Adeegso beddelaha EIA485RS232 si aad ugu xidhidhiyaha,ku xidh xidhidhiyaha 9-core ee beddelaha oo leh 9-pin interface ee kombuyuutar,dhammaadka kale ee beddeliyuhu waxa uu ku xidhaa khadka EIA485 serial interface (2 khadadka) ee muraayadda iftiinka (ka muuqda sawirka 4.2). ).Ku xidh TX+ iyo SYNA (khadka cagaaran) ee qaataha shaashadda iftiinka, ku xidh TX- iyo SYNB (khadka cawlan) ee qaataha daaha iftiinka.
10.2 Xiriirka ka dhexeeya shaashadda iftiinka iyo PC
1 Connection: ku xidh emitter-ka iyo qaataha sida ku cad jaantuska 5.2, oo hubi in xidhiidhku sax yahay (korontada inta aad fiilooyinka ku xidhidhayso), xidhidhka hawada iyo soo dhawaynta waji ka waji oo samee toosin.
2 Awoodda shaashadda iftiinka: shid sahayda korontada (24V DC), sugitaanka shaashadda iftiinka xaalad shaqo oo caadi ah (faahfaahin dheeraad ah qaybta 6, tilmaamaha ogaanshaha)
3 Xidhiidhka PC: ku shaqee barnaamijka Light-Screen, sida ku cad qaybta 9, tilmaamaha shaashadda iftiinka iyo sida loola xidhiidho PC.
10.3 Ogaanshaha xaaladda iyo dejinta cabbirada shaashadda iftiinka
1 Ogsoonow heerka shaqada ee shaashadda iftiinka adigoo isticmaalaya interface interface: adigoo isticmaalaya shayga cabbirkiisu yahay 200*40mm oo ku socda dhidibka indhaha kasta, iftiinka tusaha muraayadda dhijitaalka ah ayaa shidan ama dami si u dhiganta (lagu akhriyay ) badhanka waa in la shidaa inta lagu jiro qaliinka)
2 Markaad isticmaaleyso jaangooyooyinka setup interface si aad u dejiso cabbirrada shaashadda iftiinka, waa inaad fiiro gaar ah u yeelataa qaybta 9, tilmaamaha shaashadda iftiinka iyo sida loola xiriiro PC
